Martindale Abrasion and Pilling Tester for Industrial Use

Martindale Abrasion & Pilling Tester is used for checking the abrasion besides pilling resistance of fabrics. SKZ Industrial provides you the high-quality Martindale Abrasion and Pilling Tester that is calibrated & available at affordable price. It consists of 4 testing plates where the grazing fabrics is attached, these 4-testing table are well mounted on base plate of this instrument. There’s revolving plate that revolves with the help of 3 cranks, motor and pegs.

martindale-abrasion-cum-pilling-tester-04
There are 4 sleeves attached on revolving plates. The holders for the abrasion and pilling testing are offered with the instrument. There’s a set of weights for the proper pressure on test specimens. The templates for the cutting of samples and abrading cloth as well as their mallet are also provided as the standard accessory.
logo
Some of the salient features of Martindale Abrasion and Pilling Tester are-
  • Operative speed ratio of the outer pegs towards inner pegs
  • Four specimen can be examined at the same time.
  • Maximum load it can hold is 790g (corresponding to the pressure of 12KN/m2)
  • Include stainless-steel balls.
  • Top Plate made of Acrylic for safety
  • Easy reset counter
  • Excellent testing performance
  • Synchronous motor speed
  • Longer service life
  • Suitable for all kind of fabrics
  • The measurement procedure is unavoidably generate scan & reports that can be printed
The technical Specification of Martindale Abrasion and Pilling Tester comprise of
  • No. of heads - 4
  • Working pressure on the test specimen - 3 KPA, 6KPA, 9KPA & 12 KPA (4 numbers each)
  • Exposed test specimen area - 6.45 cm2
  • Maximum pressure available - 12 KPA (790 grams)
  • Drive speed ratio of inner and outer peg - 32:34

Comments

  1. Unknown17 February 2017 at 18:54

    You have a good point here!I totally agree with what you have said!!Thanks for sharing your views...hope more people will read this article!!!
     Martindale Abrasion Tester

    ReplyDelete

Post a Comment

Popular posts from this blog

Buy Gas Analyzer, Moisture Meter and Crush Tester Here

Image
A reliable M oisture Meter is pre-requisite for the good storage. From several moisture meters available in the market, SKZ Industrial has selected "crush type" Moisture Meter that can handle most ordinary commodities like as paddy, coffee and corn. This handheld device gives accurate readouts of the moisture levels for several types of grains in few seconds. Hence, this Moisture Meter helps the users to determine if the precise commodity is at required moisture level. This apparatus comes in very handy case & is a very reliable instrument to measure moisture whilst out on the field.
Read more

Microwave Digestion for Different Samples

Image
Microwave is a technique which is used to dissolve the solid sample matrices into the aqueous liquid. This is simply achieved by placing a sample in the concentrated acid matrix in a closed vessel & exposing it to the microwave irradiation. The speed of thermal decomposition of a sample & the metal’s solubility are increased. Once the sample metal is in solution, it can be computed through the spectroscopic techniques. The Microwave digestion process routinely cuts the period of sample preparation by 60-75% % as compared to the hot block and hot plates. Temperature measurement & control are the two most important parameters in microwave digestion . And with the help of suitable instrument, you can accurately measure the direct interior temperature of every vessel in the process of microwave digestion. It allows you to significantly simplify the whole process. This increased performance after using a suitable medium for microwave digestion will expand the ...
Read more

A Wide Range of Quality Industrial Equipment to Choose From

The Gas Analyzer allows the extent and measurement of the respiratory gas concentration absorptions from tiny insects to humans. It has an infrared CO 2 sensor with an optical oxygen detector.  Gas analyzers, detectors and sensors are safety equipment used in the commercial, medical, industrial and many other industries. Normally, such devices play main role in offering life safety & to avoid fire break-outs by uninterruptedly monitoring and analyzing the concentration of toxic gases in several end user industries. Therefore, gas analyzers are used for the measurement and monitoringof the concentration as well as quantity of single / multi gases in the combination of gases, thus providing sufficient safety to the life.  Based on several working principle technology, these devices are classified into Catalytic, Zirconia, Electrochemical, and Infrared, metal Oxide Semiconductor (MOS), Electrochemical, Infrared, Photo Ionization Detection (PID) etc. Each of thes...
Read more